BORUN developed 3 series New Air coolers to satisfy all Refrigeration requirements in highmedium and low temperature application and in different humidity conditions.

4.5mm/YED-A Series=Fin spacing=4.5mm

7mm/YED-C Series=Fin spacing=7mm

10mm/YED-D Series=Fin spacing=10mm

High-efficiency inner grooved copper tube and wave aluminium fins had been used for designing Evaporators the higher heat transfer efficiency can be achieved.

High quality distributor selecting and refrigeration system optimizing ensure maximum efficiency of evaporator in various applications of Air coolers.

Hidria axial fans were matched to new Air coolers this will lead to new features for air coolers-high efficiency and saving energy. In addition we can customize product using other brand fan in line with requirement of customer.

Defrost stainless electrical heaters were put into aluminum tubes ensure defrost heat to utilizing fully and sgnificantly reducing loss.

Strength Design could reduce vibration and Noise Level effectively. Hinge parts make check maintenance and cleaning more easily.

YED-A Series(fin spacing=4.5mmR404A)

YED-C Series(fin spacing=7mmR404A)

YED-D Series(fin spacing=10mmR404A)

SC1-Air Inlet temperature=10℃DT=10KRH-85%Overheat=6.5K;
SC2-Air Inlet temperature=0℃DT=8KRH-85%Overheat=5.2K;
SC3-Air Inlet temperature=-18℃DT=7KRH-95%Overheat=4.6K;
SC4-Air Inlet temperature=-25℃DT=6KRH-95%Overheat=3.9K;

The data refer to sound pressure level(1m)

Ⅱ.Refrigerant correction factors

Ⅲ.Connection pipe standard

Ⅰ.Working conditions

Note1: SC1-Air Inlet temperature=10℃DT=10KRH-85%Overheat=6.5K;
SC2-Air Inlet temperature=0℃DT=8KRH-85%Overheat=5.2K;
SC3-Air Inlet temperature=-18℃DT=7KRH-95%Overheat=4.6K;
SC4-Air Inlet temperature=-25℃DT=6KRH-95%Overheat=3.9K;

Note2: The data refer to sound pressure level(1m)

Ⅱ.Refrigerant correction factors

Ⅲ.Connection pipe standard

Dimensionselectric defrost heaterWeights